0-600rpm Mgbanwe Ngwa ngwa Master Batch na-emepụta igwe nwere akụkụ nri
Nri: | Mfu akpaaka na Sistemụ nri ibu | Ngwa: | Plastic Pellets |
---|---|---|---|
Ndị injinia si mba ofesi: | Dị maka ntinye na ntinye | Dayameta Barrel: | 71.8 mm |
moto: | 132kw | Ike: | 500-1000kg / h |
L/D: | 48:1 | Ihe nke Barrel: | 45 : igwe anaghị agba nchara |
Mfu SJSL75B na pelletizer mgbanaka mmiri dị arọIgwe nrụpụta Master Batch
Nkọwa ngwa ngwa
Nri: mfu na ibu, nri akpaaka.
Ike: 132kw
Ihe ịghasa: W6Mo5Cr4V2
Akụrụngwa gbọmgbọm:45 #ụba nchara nke nwere alloy na-eguzogide abrasion 101 (Ni-Fe-Cr-W) n'ime ọmarịcha ahụ.
na abrasion eguzogide.Isi ike bụ HRC60-64.
L/D:48:1
Mmepụta: 500-1000kg / h dị ka ihe dị iche iche, usoro na nkà na ụzụ nke usoro wdg.
Mgbanwe: 0-600rpm;
Oke mbelata: i = 2.5:1
Mfu na nkọwa nri dị arọ
1) Ejiri akụkụ feeder arụnyere n'elu ikpo okwu, yana ihe mmetụta dị elu nke United States Toledo mere,
2) Plasform na-atụ aro bụ ọnụ ọgụgụ square na ihe ss304;
3) akụkụ niile akpọtụrụ na akụrụngwa emere nke SS304, yana akụkụ nri a na-ewepụ ngwa ngwa maka mgbanwe ngwa ngwa yana ịdị ọcha.4) ọ dịghị onye nwụrụ anwụ hopper, onwem na kehoraizin Ịgwakọta;
5) Ike moto: 1.5KW, oke ọsọ: 11: 1, na njikwa ọsọ inverter;
6) Onye na-ahụ maka microchip iji hụ na nri ziri ezi dị elu, izi ezi nri nwere ike iru ± 0.5%.Ike ọkọlọtọ: 380V, 3-phase, 50 Hz;
7) na hopper iji hụ na ihe n'ime gbọmgbọm dị ka setịpụrụ proportioning;
8) kwadoro mita dị elu na nke dị ala.
Oke nke ọkọnọ
Mba. | ọdịnaya | Nkeji | Ọnụọgụ | Akara |
1 | Ngwakọta ọsọ dị elu | setịpụrụ | 1 | 500L |
2 | Igwe nri ịghasa | setịpụrụ | 1 | 1,5kw |
3 | Ejima ịghasa extrusion usoro | setịpụrụ | 1 | |
3.1 | Usoro nri | setịpụrụ | 1 | 1,5kw |
3.2 | SJ-75B ejima ịghasa extruder | setịpụrụ | 1 | 132kw, 48:1 |
3.3 | Sistemụ ikuku ikuku | setịpụrụ | 1 | 2,2kw |
3.4 | Usoro ịgba ígwè mmiri | setịpụrụ | 1 | 0,55kw |
3.5 | Ihe ngbanwe ihuenyo akpaaka | setịpụrụ | 1 | 1,5kw |
4 | Igwe ọkụ eletrik | setịpụrụ | 1 | |
5 | Igwe inyeaka mgbanaka mmiri | setịpụrụ | 1 | |
5.1 | Mmiri-mgbanaka anwụ isi | setịpụrụ | 1 | |
5.2 | Ọkpụcha ihu nwere okporo ụzọ nduzi nwere mkpuchi | setịpụrụ | 1 | 1.5KW |
5.3 | Centrifugal dehydrator | setịpụrụ | 1 | 5.5KW |
5.4 | sieve na-ama jijiji | setịpụrụ | 1 | 0.4KW |
5.5 | Ihe nchekwa | setịpụrụ | 1 | |
6 | Akwụkwọ | setịpụrụ | 1 |
Foto nke SJSL75B Filler Masterbatch Machine
Main teknuzu data nke dị iche iche nlereanya nke ejima ịghasa extruder pelletizing igwe
Ụdị ụdị | Usoro | Dayameta Barrel (mm) | Dayameta ịghasa (mm) | Mkpọsa L/D | screw speed n(r/min) | Ike moto (Kw) | Screw torque T(Nm) | Ọnụọgụ torque (T/A3) | Ike mmepụta ihe (kg/h) |
SJSL-36 | A/B/C/D | 36 | 35.6 | 32-48 | 400/600 | 11/15/18.5/22 | 125-225 | 4.6-8.3 | 30-120 |
SJSL-51 | A/B/C/D | 51 | 50.5 | 32-52 | 500/600 | 45/55/75/90 | 405-680 | 5.1-8.5 | 120-400 |
SJSL-65 | A/B/C/D | 63 | 62.4 | 32-64 | 500/600 | 75/90/110/132 | 680-1200 | 4.8-8.5 | 180-750 |
SJSL-75 | A/B/C/D | 72 | 71 | 32-64 | 500/600 | 110/132/160/250 | 995-1890 | 4.6-8.7 | 300-1200 |
SJSL-95 | A/B/C/D | 94 | 93 | 32-64 | 500/600 | 250/315/450/550 | 2260-4510 | 4.7-8.7 | 700-2500 |
SJSL-135 | A/B/C/D | 135 | 133 | 32-48 | 400/500 | 550/750/900/1200 | 6200-10800 | 4.4-7.7 | 1550-6500 |
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Ụlọ ọrụ anyị bụ akwụkwọ CE, ISO9001:2008.
The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa parallel co-rotating"cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na akpaka plastic pelletizing igwe.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.