Igwe na-ebupụ Polymer Single na-agbanwe ihuenyo akpaaka 300-400kg/H
| Nhazi screw: | Otu ịghasa Extruder | Ngwa: | Ihe nkiri Plastic imegharị Pe PP, Scrap wdg |
|---|---|---|---|
| Akwụkwọ ikike: | Otu afọ | Dayameta skru: | 180mm |
| moto: | 110kw | Ike: | 300-400kg kwa elekere |
| Ihe: | 38CrMoALA | Central Height of Screw: | 900mm |
Imegharị PE PP YD180 Single Screw Extruder Plastic Pelletizing Machine
Njirimara nke otu ịghasa extruder
1.Igbe nkenke gia dị elu nwere ikike nke ibu ibu, nnyefe dị nro, mkpọtụ dị ala
2.gbọmgbọm na ịghasa emebere ọhụrụ iji hụ na ekesara nke ọma ihe na agbaze, obere agbaze okpomọkụ na mmepụta dị elu.
3.A na-eji ọkọlọtọ na nkenke dị elu mee ihe nkedo ahụ n'oge usoro.Mgbe gas na nitride gwọchara ya, ọ na-enwe ike eyi ike na mgbochi corrosion.Maka ihe pụrụ iche, ọla abụọ dị maka gbọmgbọm wdg.
4.A na-eme ka gbọmgbọm ndị ahụ dị jụụ site na iji ọnọdụ arụ ọrụ dị oke ogbi, obere mmezi
5.PID na-ejikwa mita okpomọkụ nke Japan nwere ọnọdụ okpomọkụ kwụsiri ike na nke ziri ezi.
6.Ụdị ụdị isi ọnwụ abụọ: akwụkwọ ntuziaka na ụdị hydraulic maka mgbanwe dị mfe na ịchekwa oge.
7.ABB ma ọ bụ akara ọsọ Inverter ama ama ama ama maka igwe kwụsiri ike ma dị mma yana ịrụ ọrụ dị mfe
Ngwa a na-ahụkarị
Na-arụ ọrụ maka ihe eji esiji ihe eji eme ihe, na-emegharị pellets plastik site na fim, flake, scrap na plastik engineering, dị ka ABS, PC, POM, PP, PE, ABS / PC, PET wdg.
Isi oru oke nke YD-180 mmepụta ahịrị
1. Single ịghasa isi igwe:
1) dayameta ịghasa: ￠180mm, L/D: 28:1,
2) A na-ejikọta ihe nkedo ahụ na igbe gia site na spline involute;
3) Ihe ịghasa: 38CrMoALA, nitrogen hardening.Isi ike nke elu bụ HV
950-1050, akwa oyi akwa: 0.5-0.7 mm;ihe gbọmgbọm: 38CrMoALA,
nitrogen hardening., ike nke elu bụ HV 950-1050;miri emi
oyi akwa: 0.5-0.7 mm;
4) Isi moto ike: 100 kw, (A / C) ọsọ na-achịkwa Italy regulator;ịghasa ọsọ
17-84 rpm;
5) kpo oku gbọmgbọm: nkedo- Igwe ọkụ aluminom.Ike ikpo ọkụ: 60 kw, kewara na mpaghara 7, The
igwe isi bụ mpaghara na ndị ọzọ bụ mpaghara 8.Ịjụ oyi site n'ịfụ ụzọ;
6) igbe igbe ihe ngosi 250 anabatara.A na-achịkwa ọsọ ahụ site na igbe nnyefe isi na elu
torque, na ihu gia siri ike, na-eji SKF ebubata ibu, ihe nke
Gear axial bụ 20CrNiMo, site na imikpu carbon na kpo oku mesoo,
HRC60-63;
7) Nakweere akpaka ihuenyo mgbanwe, na-arụ ọrụ mfe;
Foto nke imegharị PE PP YD150 Single Screw Extruder Plastic Pelletizing Machine
Isi teknụzụ data nke ụdị dị iche iche nke otu ịghasa extruder palstic pelleitizing igwe
| Ụdị ụdị | Dayameta ịghasa (mm) | Mkpọsa L/D | Ike moto (Kw) | screw speed n(r/min) | Ike mmepụta ihe (kg/h) |
| YD-30 | 30 | 25-33 | 4/5.5 | 3-100 | 2-15 |
| YD-45 | 45 | 20-32 | 5.5 / 7.5 | 5-84 | 5-40 |
| YD-60 | 60 | 20-32 | 17.5/22 | 5-84 | 15-80 |
| YD-90 | 90 | 20-33 | 30/37 | 5-84 | 25-120 |
| YD-100 | 100 | 20-33 | 37/45 | 5-84 | 45-150 |
| YD-120 | 120 | 20-33 | 45/55 | 5-84 | 75-200 |
| YD-150 | 150 | 20-33 | 75/90 | 5-84 | 150-300 |
| YD-180 | 180 | 20-33 | 90/132 | 5-84 | 200-400 |
| YD-200 | 200 | 20-33 | 110/160 | 5-84 | 250-500 |
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Ụlọ ọrụ anyị bụ akwụkwọ CE, ISO9001:2008.
The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa parallel co-rotating"cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na akpaka plastic pelletizing igwe.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.
AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA Mbụ, na anyị factory bụ certificated kaISO 9001: 2008naCE.
