Igwe mmiri n'okpuru mmiri Pelletizer Single Screw Extruder Maka Ihe eji agbaji Raw Plastic
Nhazi screw: | Otu ịghasa Extruder | Ngwa: | PP PE wdg |
---|---|---|---|
Akwụkwọ ikike: | Otu afọ | Dayameta skru: | 220mm |
moto: | 280kw | Ike: | 800-1000kg kwa elekere |
Ihe: | 38CrMoAlA | Central Height of Screw: | 900 mm |
YD220 n'okpuru mmiri PP PE Waste Material Pelletizing MachineIgwe ihe nkedo nke otu Screw Extruder
Njirimara nke Yongjie otu ịghasa extruder
1.Igbe nkenke gia dị elu nwere ikike nke ibu ibu, nnyefe dị nro, mkpọtụ dị ala
2.gbọmgbọm na ịghasa emebere ọhụrụ iji hụ na ekesara nke ọma ihe na agbaze, obere agbaze okpomọkụ na mmepụta dị elu.
3.A na-eji ọkọlọtọ na nkenke dị elu mee ihe nkedo ahụ n'oge usoro.Mgbe gas na nitride gwọchara ya, ọ na-enwe ike eyi ike na mgbochi corrosion.Maka ihe pụrụ iche, ọla abụọ dị maka gbọmgbọm wdg.
4.A na-eme ka gbọmgbọm ndị ahụ dị jụụ site na iji ọnọdụ arụ ọrụ dị oke ogbi, obere mmezi
5.PID na-ejikwa mita okpomọkụ nke Japan nwere ọnọdụ okpomọkụ kwụsiri ike na nke ziri ezi.
6.Ụdị ụdị isi ọnwụ abụọ: akwụkwọ ntuziaka na ụdị hydraulic maka mgbanwe dị mfe na ịchekwa oge.
7.ABB ma ọ bụ akara ọsọ Inverter ama ama ama ama maka igwe kwụsiri ike ma dị mma yana ịrụ ọrụ dị mfe
Ngwa a na-ahụkarị
Na-arụ ọrụ maka ihe eji esiji ihe eji eme ihe, na-emegharị pellets plastik site na fim, flake, scrap na plastik engineering, dị ka ABS, PC, POM, PP, PE, ABS / PC, PET wdg.
Isi oru oke nke YD-220 mmepụta ahịrị
No | ọdịnaya | Nkeji | Ọnụọgụ | Akara |
1 | Igwe ihe nkedo | setịpụrụ | 1 | 2,2kw |
2 | Sistemụ extrusion otu ịghasa | setịpụrụ | 1 | 280kw,32:1 |
2.1 | Usoro nri | setịpụrụ | 1 | 3KW |
2.2 | YD-220 otu ịghasa extruder | setịpụrụ | 1 | |
2.3 | Ihe ngbanwe ihuenyo akpaaka | setịpụrụ | 1 | 1.5KW |
3 | Igwe ọkụ eletrik | setịpụrụ | 1 | |
4 | Usoro inyeaka mmiri-mgbanaka | setịpụrụ | 1 | |
4.1 | Nwuo isi | setịpụrụ | 1 | |
4.2 | Ihe ncha ihu | setịpụrụ | 1 | 2,2kw |
4.3 | Igwe mmiri na-ekpo ọkụ | setịpụrụ | 1 | 11kw |
4.4 | sieve na-ama jijiji | setịpụrụ | 1 | 0,75kw |
5 | Sistemụ igwe inyeaka pelletizing n'okpuru mmiri | setịpụrụ | 1 | UW1000 |
5.1 | Sistemụ valvụ tụfuo | setịpụrụ | 1 | 4kw |
5.2 | Ịcha isi | setịpụrụ | 1 | |
5.3 | Ịcha mma usoro | setịpụrụ | 1 | 7.5KW |
5.4 | valvụ pneumatic | setịpụrụ | 1 | |
5.5 | Igwe mmiri na-ekpo ọkụ | setịpụrụ | 1 | 11kw |
5.6 | Usoro njikwa eletriki | setịpụrụ | 1 | PLC |
5.7 | vibrator | setịpụrụ | 1 | 0.75 kW |
6 | Akụkụ mapụtara n'efu | setịpụrụ | 1 |
Foto nke otu skru extruder plastic pellet mahcine
Isi teknụzụ data nke ụdị dị iche iche nke otu ịghasa extruder palstic pelleitizing igwe
Ụdị ụdị | Dayameta ịghasa (mm) | Mkpọsa L/D | Ike moto (Kw) | screw speed n(r/min) | Ike mmepụta ihe (kg/h) |
YD-30 | 30 | 25-33 | 4/5.5 | 3-100 | 2-15 |
YD-45 | 45 | 20-32 | 5.5 / 7.5 | 5-84 | 5-40 |
YD-60 | 60 | 20-32 | 17.5/22 | 5-84 | 15-80 |
YD-90 | 90 | 20-33 | 30/37 | 5-84 | 25-120 |
YD-100 | 100 | 20-33 | 37/45 | 5-84 | 45-150 |
YD-120 | 120 | 20-33 | 45/55 | 5-84 | 75-200 |
YD-150 | 150 | 20-33 | 75/90 | 5-84 | 150-300 |
YD-180 | 180 | 20-33 | 90/132 | 5-84 | 200-400 |
YD-200 | 200 | 20-33 | 110/160 | 5-84 | 250-500 |
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Ụlọ ọrụ anyị bụ akwụkwọ CE, ISO9001:2008.
The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa parallel co-rotating"cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na akpaka plastic pelletizing igwe.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.
AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA Mbụ, na anyị factory bụ certificated kaISO 9001: 2008naCE.